Show Your Pedalboards (Evo) Then

Royal bloody tone.



Signal path runs from TLC compressor to bass big muff and splits into two paths there.

The fx output of the muff runs through the pitchblack tuner (so I can cancel out the bass signal and/or tune my bass) into the Darkglass VMT to the instrument input of my Trace Elliot bass amp.

The dry out of the muff runs through the Taurus Dexter poly octaver into an AMT SS-11A guitar tube preamp which conveniently also has an analog speaker sim.
On the guitar preamp both the clean channel gain and volume are at 0 so I can cancel out the "guitar" signal by switching to the clean channel. Nifty eh?
Currently the output of this AMT SS-11A runs into the (parallel mode) fx return of my Trace Elliot bass amp.

Sadly my main (Mesa) amp only has a series fx loop which means it can't blend the bass and guitar signals like the Trace Elliot. I am looking for an ABY switch to solve this, but the signal must not bleed from A into B or vice versa and only be forwarded to Y. Any suggestions?

The bass big muff is only on there to split the signal btw, I never use any fuzz.
 
I would use a buffered splitter instead of a big muff (which is probably buffered but im not sure), it would take up less space and is a whole lot lighter too.
 
Here is mine (well, it's more like a baby pedal board, without any support panel) :
IMG_0267.jpg
The red one is a EHX bassball USA modded
 
Nearing perfection...
Left side for guitarsounds (thru the dexter octave up), right side for bass tone. Middle for switching/combining.
 
Here´s mine: EBS Octabass, Boss ODB2, Spede Fuzz, Ibanez stereo chorus, Boss SYB5, Boss VE20 Vocal Performer (and DMX light controller pedal)
IMG_4616.jpg
 

Attachments

  • IMG_4623.jpg
    IMG_4623.jpg
    90.1 KB · Views: 387
Here's how my board sounds with everything full blast. Darkglass VMT pedal on the bass side, Tech21 Flyrig5 with plexi overdrive and the small clone phaser on the guitar side. Don't judge my sloppy playing it is just a soundtest.
 
Woah, that's a pretty huge sound, DiMarco!

Sent fra min SM-G900F via Tapatalk
 
My current setup:


This setup allows for very easy 1 click presets plus some extended functionality. For my swell patch the expression becomes a volume pedal, the M9 has modulation and delay. For my synth patchs the M9 starts a synth sound, then EQ's to taste. I have tons of filtered patches for various forms of electronic or even dubstep style. I of course have many straight forward patches with overdrive, saturated OD, fuzz, LPF, etc.

I still have yet to do a video run through, the Source Audio Solemate is still in Alpha testing so I am unable to show too much publicly, but once that tape is lifted I plan on having a full runthrough nailed down.
 
DiMarco said:
Here's how my board sounds with everything full blast. Darkglass VMT pedal on the bass side, Tech21 Flyrig5 with plexi overdrive and the small clone phaser on the guitar side. Don't judge my sloppy playing it is just a soundtest.
Click to expand...

Wow!
 
DiMarco said:
Here's how my board sounds with everything full blast. Darkglass VMT pedal on the bass side, Tech21 Flyrig5 with plexi overdrive and the small clone phaser on the guitar side. Don't judge my sloppy playing it is just a soundtest.
Click to expand...

Huge sound, huge.
 
11080 said:
Charmand, can you compare Zoom with Boss GT6B ? Boss weights too much, I started thinking it should be replaced with something light but without loosing the edge.
Click to expand...

Sorry, I dont have any experience with GT6B. Have a look at the Zoom B3.
 
Added: Ditto looper, Bass Wowee wah is also back.
Gone: EHX Small Stone Phaser, Tech21 FlyRig 5 - these were replaced by the Avid Eleven Rack 19" modelling toy.

The Eleven Rack is giving any Line6 modeller a run for its money. Awesome (for a modeller).
 
You must log in or register to reply here.
Back
Top