problem

  1. X

    Input Jack Problem

    Around last christmas, maybe the second week into december of 2008, with the financial assistance of my Aunt, we went down to Rudy's music shop in order to purchase a bass. (In New York City) After looking around for some time, I set my eye on a Warwick Rockbass, 4 string Fortress. I love this...
  2. B

    Corvette neck problem

    Hi Guys First time on line and wondered if someone could help me out. I have an active corvette which a couple of years ago I noticed the necking bending inward resulting in a high action. I took it to my local tech who corrected it but said that he had to use all the correction in the truss...
  3. E

    Warwick electronics/energy problem

    Hi guys! I'm actually at the edge of frustration, because I really don't know what could happen to my bass (i've got warwick fna jazzbass). It works perfectly the day beore yesterday and PUF! he started to play more and more quite. Firstly i thought it was the case of the battery - so today I...
  4. S

    problem with intonation on G string fretless

    I recently purchased a warwick corvette standard fretless with flatwounds on it. The G string has poor intonation and tone--almost sounding slightly muted without sustain. Is there an adjustment I need to make at the bridge? It does not "fret" a note at the same position as the lower 3 strings...
  5. J

    Neck relief problem

    Hi Have recently bought used corvette 5str $$ 2005 model. Ebay purchase v. cheap and before the inevitable replies about going back to dealers etc. this isn't an option. Bought as seen and seller removed himself from ebay shortly afterward - probably v. stupid. The question is how best to...
  6. dazzla

    Warwick Thumb BO push/pull volume problem

    Hey guys, this is the first time i have had the need to start my own thread and since we all seem like a smart and helpful bunch on the Warwick forum(and talented..just listen to the Warwick forum compilation part 1!) i know someone here can help me. For a few years now my 5 string Thumb BO has...
  7. iuserneim

    problem with my vintage SSII

    hi everybody. yesterday i during rehearsal, my bass suddenly started to have that overdriven sound. i checked the amp, and tried it with another bass. everything was ok. but my bass was overdriving as hell. i thought it was the battery, but it was not. the bass was overdriving even with a...
  8. J

    moving speaker problem?

    hey, i got a 2x10 cab rated for 400W (the pro 211), and am putting about 200W through it with my amp. when i crank the volume, the speakers will move a considerable amount, even if i play quietly. But if i start slapping while the volume is turned up, the speakers go crazy and i'm worried...
  9. EVOLVEBASS

    Problem: Body Wood Crack

    I am bumming pretty hard right about now. I just noticed that my LTD 2009 has a crack in the olive wood top. I remember noticing what I thought was just a scratch when I first got it, but now it seems to be getting worse/longer. It runs below the neck pickup towards the volume knob. Possibly the...
  10. NZ Bassman

    WCA 411 Pro 8 ohms horn problem?

    I'm pretty sure the cabinet I have is the WCA 411 Pro 8 ohms. When I first bought it, I used it with my old Yamaha Motion B Bass, and when the horn was turned up it produced a loud crackling / static sound. The man at the music shop said it is because my bass was not 'earthed' properly. I...
  11. ChrisK

    Problem with Pontetiometer

    Hallo all.. this is my first post in this forum I became a warwick owner 3 months ago with a second-hand dolphin SN-TNS 5 string. Suddenly while i was playing, i wanted to make it passive by pulling my volume knob but it made a noise when i used it and it keeps making that sound. ( the usual...
  12. Thrym

    Problem with intonation of E-string

    Hello guys, I recently bought my second Wick, another Corvette. Everything's fine, great sound etc. BUT: On the E-string I don't get the intonation correct. All ohter strings are fine, but this one... I play the 12th fret and it's to high. So i adjusted at the bridge, further away from the...
  13. G

    Small problem!

    Hi! I didn't know quite where to put this, so I put it here and under Customer Support! Delete the other one if this is the correct one! I recently got a 25 year old Warwick Thumb NT, which I am very happy with! It's a dream come true! However, on my first gig, the battery cover on the back...
  14. P

    Problem with 2nd stage on Pro Tube IV

    Sorry for the multiple post the original can be found at the link below over in the customer support, but there may be more people around in this forum. Thanks Pete
  15. P

    ProTube IV 2nd stage problem

    My ProTube IV has developed a problem with the second stage on the tube channel. The symptoms are first stage works fine with no problems. When the second stage is engaged it works fine for the first 10 to 15 mins then gets very noisy with very loud crackles and pops then goes dead. If I...
  16. S

    pre-amp problem on a stage II.

    Hello fellow warwick obsessors! I have a problem with my 5 month old Streamer stage II. On active mode i get a very low volume with distortion, on passive mode the volume is fine but i get constant strange and loud noises. I tried changing the battery and i've also checked every...
  17. F

    2nd hand rockbass distortion problem

    evening all. i got a '04 corvette rockbass (5string) off the bay last week. turns out that when i play the E and B strings hard while on one particular pickup there's a load of distortion. if i switch to the other pickup there is a tiny bit of distortion. i have tried 3 amps, 2 cables, 2...
  18. C

    Thumb electronic problem

    So im am the proud owner of a thumb and i have seem to ran into a brick wall. Ill be playing my bass and every now and then the active pickups cut out and it goes to like 25% strenght in signal it just dies i tried switching batteries unfortunately still have the same problem so i took it into a...
  19. ArGh

    Possible problem with my bridge

    hi everyone, new user here (actually first post, i'll finnaly get rid of the nagging notice... :P) i just recently bought a Corvette $$, couldn't be happier with it. It definitly live to the "hype". tonal possibilities are awesome (still strugling a bit to be honnest, but i'm getting very...
  20. Simon Farmery

    Earthing problem with a Streamer Stage I

    Hi Guys, Just a quick one to see if anyone has had the same problem that I'm getting. I have a Streamer Stage I that out of no where has got an earth problem that only goes away if you touch the Volume pot or the Jack lead at the input socket. Norbert has sent me a new volume pot, which I...
Back
Top