replacement

Hi to all, I own a Warwick Streamer STD 1999 Germany, I bought it second hand like a week ago. The bass is great plus it has an EMG preamp but the truss rod is not working. I red something about the different truss that Warwick has but i can't find any information regarding this specific model...

Hi Warwick lovers, I have an old Warwick Streamer Stage I 5 string bass build around 1988 or 1989. it has got Bartolini soapbar PU's Since this bass didn't have it original electronics i am looking for a replacement. What electronics can i use, what are your recommendations? Thanks in...

Hi All, great forum, tried a search but didn't find the info I needed, hence this post. I'm looking for a replacement volume pot for my 2011 Streamer Stage II 5 string. I'm not really sure how to go about getting one though. Can somebody point me to the part # and perhaps give me hints as...

So I got this awesome 2006 Corvette STD 5 with passive MEC DC J pups and the volume drop compared to my '04 $$ 4 is very large, so I wanna throw some active guts in it. I wanna keep the passive pups but install an active preamp, a push/pull volume/preamp bypass pot, pickup pan pot, and a stacked...

Just got a new, to me, Rockbass Corvette Double Buck. Seriously great quality for the money. The only issue is that the pickups sound muffled and seriously lack high end. Is this just the way the MEC pickups sound or is there an issue with them or the wiring? I am considering replacing them with...

I have a '94 Fortress One 5-string, and I need to replace all of the pickup-height screws, and one or two of the bridge saddles. I have looked at local hardware and music stores, and online at places like Allparts and Banzai, and no luck. The screws are 2.5 mm by 35 mm. The saddles, I don't...

I have a 2008 Corvette Standard Fretless that's 100% stock. I love the crusty, raw, aggressive growl of the passive MEC pickups, but the noise makes them unusable in many situations. So, what is my best option for replacing the pickups without losing the character? I don't usually like the...

Following up on a lengthy thread over in the bass guitar forum related to a quite loud hiss in a 1997 Thumb NT 4-string (18v preamp). The bass produces a good amount of hiss when in active-EQ mode -- very quiet when in EQ bypass mode. I would like to replace the preamp with a current MEC...

hey guys i was adjusting my bass tonight and the saddle screw on one side of the saddle stoped working. I can adjust without the string but as soon as the string is put on the saddle the screw goes back into the saddle. id imagine this is broken. Where can i get a replacement? or what other...

Hi, The input jack for the speakon connection on my WCA 411ND cabinet has become worn down through use and the connection is now faulty. Could you please tell me where i can order a new input jack? Thanks David

Somehow...I lost my bridge saddle for my .105 string. How much would it cost to get this replaced in the USA?

Since this is really the only bass forum i hang out out, even though I run an ampeg rig, I'ma postin it here mates!!!! my ampeg bse 410 cab has one blown speaker i can hear cracklin from time to time, and the rig just has no balls, yeah it has volume and trembles rafters but, thats it, no...

I'm not 100% happy with the pickups in my Standard. How about some recommendations for possible replacements? For reference, I have a four-string with passive electronics; no preamp of any kind. I'm happy with the midrange punch I get, but what bothers me is a little bit of "blurriness"...

I've got a passive Warwick Corvette Standard and I have been thinking about putting some Lollar J-Bass pickups into it. The Pups in the Warwick look to be jazz bass type pickups. I am wondering if these pickups would work in my Warwick without needing to do any modifications or routing.

I am currently thinking about buying a '91 Dolphin Pro II. I checked it and - apart from a lot of dust - I found the stacked EQ-Pot to be defective: Both (Inner and outer) shafts are like clued together and with reasonable effort I don't get them separated. So I think I'd need e new pot. Is...

Hey Flo and all! Is it possible to order a stronger truss rod? Bass is a '94 Streamer bolt-on with a sandwiched neck (maple-wenge-maple-wenge-maple). It is really slim and feels great but I can't seem to straighten it out (I like an almost flat neck with minimal relief) even at the tightest...

This is my first post, so I'd like first of all to say hi to everybody, and to tell you that I've been following your forum allready for a while even if I had never posted before, and that I find it very useful and interesting. :d Now here is my problem: I own a 1990 5 string thumb nt, to...

Anyone have suggestions on what string to use on a fretless Jack Bruce Thumb from 1990?

Is it possible to swap out a neck/fretboard on a Thumb 4BO? If so, where do I buy one to start off with... Done a lil searching and didn't find anything.. Thnx!

Hello to all from Tennessee,I just got my son a corvette standard that needs a new nut.how do I go about getting a new one or how to contact a parts dept? Thanks....god I love the corvette !!!!