adjustment

Hi! I would be very thankful if anybody could explain me one thing. There's a little potentiometer on my Streamer Stage I preamp unit. What kind of adjustment it's aimed for? Pickups output? Or may be preamp output? I tried to adjust it with a little screwdriver - it definitely affects the...

I just put new strings on my Vette Double Buck a few days ago... and now my bass just feels really dead. The strings feel really tight on it... like they aren't resonating. I'm pretty sure it needs a truss rod adjustment... and I have no experience with that. I bought it off display at GC...

Hi. I'm about to purchase a fretless corvette 6'er and I understand you can adjust the string spacing at the bridge to as much as the neck will allow. I'm wondering if I can get up to 17mm before the strings want to go over the edge of the fretboard. I saw a thread where someone with a thumb5...

Well, I usually take off all my strings and clean the fretboard and neck with lemon oil, and I wax the body. I wipe down with a cloth the dust around the pickups and such(I hate dust), Anyway, I have some buzzing on the upper frets on the lower strings. And if I digg in really hard there's...

Hello, This is my third Warwick which is a Corvette Standard Fretless. My question is: When adjusting the bridge height I noticed that I could not bring it down to the point where the strings would lay on the neck. I usually do this (bringing the bridge all the way down) when I'm setting up...

Is it just me or are other people have issues with the threaded brass inserts that the pickups screw into poppinng out. I am amazed by the design and construction of this instrument but this one little "flaw" is driving me crazy! So far I have had to repair three of these bad boys in the last...

hi, I'm a little confused .. how much can we push the gain up, considering that is a hybrid amp? if I use it at half level there is a green clipping every time I play the bass, but I can't get tube saturation (orange) if I do not turn the gain to almost maximum. In the amp manual it says...

After taking apart, sanding, and oiling my bass, I put it all back together with some new strings. First I adjusted the nut, then the bridge, then the pick-ups just to the point where everything looked ok. When I adjusted the intonation, I did my high three strings and realized that something...

I understand that saddles are adjusted so that string heights maintain the radius-of-curvature of the neck. Intuitively, I would expect that in order to achieve this, the bottoms of each strings should be equidistant to the *fret*, not the fingerboard. Seth, is this correct?

Hello everyone. My name Kaymen. This is my first post. I just bought a Corvette Fretless brand new and i have some questions on setting it up. First of all, i immediatly replaced the strings with Rotosound Jazz bass 77's which are gauged .105 .85 .65 .45. I have done alittle bit of truss and...

Hi, I sent this to Warwick as well but maybe some of you guys out there have an answer or solution: I just bought a brand new Thumb 4 2001 Ltd, however I have a bridge adjustment problem. On all my other Warwick basses I have measured 2,5 mm by the 24th fret between the G string and the...