- Joined
- Aug 9, 2008
- Messages
- 65
- Reaction score
- 0
Howdy. My Corvette Std 6 has an issue with its tuning keys. I'll try to explain:
The tuners are held to the bass by two pieces of hardware: a small screw and a 15mm nut-like thing attached to a sleeve that goes around the tuning post. While changing the strings I noticed that all three of the treble-side keys and two on the bass side were loose and could rock back and forth readily. So, I located a 15mm socket and tried to tighten them by hand (no wrench or ratchet, just the socket and my fingers). It seems the nut-like sleeve or the part it screws into is stripped out, as if it were over-torqued. I ended up replacing one tuner with a spare I keep handy for things like this.
Is there any warranty on the hardware? The bass was made in 2006.
Any help would be greatly appreciated!
Tim
The tuners are held to the bass by two pieces of hardware: a small screw and a 15mm nut-like thing attached to a sleeve that goes around the tuning post. While changing the strings I noticed that all three of the treble-side keys and two on the bass side were loose and could rock back and forth readily. So, I located a 15mm socket and tried to tighten them by hand (no wrench or ratchet, just the socket and my fingers). It seems the nut-like sleeve or the part it screws into is stripped out, as if it were over-torqued. I ended up replacing one tuner with a spare I keep handy for things like this.
Is there any warranty on the hardware? The bass was made in 2006.
Any help would be greatly appreciated!
Tim

