Show Your Pedalboards (Evo) Then

I have a question for you guys - any recommendations for a power supply (under the board) ? Don't like all the individual chargers.

Line6 HX 12V/1A, Compressore 12V/1,5A, t-bone wireless 12V/1A, MXR DI 9V/500mA

20230312_120826.jpg
 
Last edited:
BrusselsBass said:
Line6 HX 12V/1A, Compressore 12V/1,5A, t-bone wireless 12V/1A, MXR DI 9V/500mA
Click to expand...

What's going to make this a challenge are the current (ampere) requirements. Question: are those specs from the pedals, or from the power adaptors? The adaptors are probably rated a lot higher than what is strictly necessary for the pedals. For example, the review linked below states that the Compressore only needs about 600mA (which is still going to be a challenge).

www.compressorpedalreviews.com

Markbass Compressore Review

Let's get the obvious out of the way. Yes, the Markbass Compressore is larger than your average compressor pedal. No it is not as pedalboard friendly as many other options. But there is a lot to like about it. Read on. The Compressore has a 12AT7/ECC81 tube inside. Probably the most remarkable...
www.compressorpedalreviews.com www.compressorpedalreviews.com
 
A challenge for pedal power 🤔🧠
Specs are from the adapters; tried the MB with the 12V WiFi- doesn't work. Maybe go lean: wifi>Line6>DI and keep the MB aside.
 
I use a onespot CS6 which has a pair of 500ma which I needed for my Strymon pedals. There has to be something flexible enough to go to 600 I would think
 
BrusselsBass said:
I have a question for you guys - any recommendations for a power supply (under the board) ? Don't like all the individual chargers.

Line6 HX 12V/1A, Compressore 12V/1,5A, t-bone wireless 12V/1A, MXR DI 9V/500mA
Click to expand...
If the Compressore genuinely needs 1.5A this probably won't work but...

The Cioks DC7 has 7 outputs, each producing 6w and individually switchable between 9,12,15 and 18v

660mA @ 9v
500mA @ 12v
400mA @ 15v
330mA @ 18v

You can also get an adapter that allows you to combine two outputs to double the current.
That would give you three 12v1A for the Helix, Compressore and T-bone and a 9v for the DI, all off one PSU.
 
This is my current board after a recent change of compressor.

Signal Path:
Line 6 G10 (wireless)
Empress Bass (Compressor)
Spaceman Polaris (Overdrive)
Deluxe Bass Big Muff Pi (Fuzz)
Line 6 HX Stomp XL (Multi effects - Headphone amp - DAI)

PSU: CIOKS DC7

20230402_104930.jpg
 
It looks cool.

I thought about the API CMP ...but wanted to try before buy
 
"We're good on the compressor side of things" ...

comps.jpg


Scored me an original DBC today. Tested it briefly and it has the buttery sweetness going on everyone is writing about on forums for sure
Oh and yes a Black Finger is one MASSIVE pedal. I had bought that one as NOS. Quad Cortex in the back for size reference.
 
You must log in or register to reply here.
Back
Top