Problem with wiring on Corvette Standard

M

Muthapuckr

Joined
Apr 15, 2008
Messages
2
Reaction score
0
I bought a used '97 corvette standard about two months ago. It was working fine until the other day when it started making loud buzzing sounds. With further inspection, it seemed the jack was loose and one of the wires that attaches to the jack was disconnected. I tightened the jack and placed the wire back were it should be and it works now (with some minor humming depending on were I position the knobs). There are two wires connected to the jack a green one and a plain silver one (which is the one that came disconnected). So im thinking i should probably solder the disconnected wire back to the jack... correct?
 
Correct, or the problem will just happen again. If you're not familiar with soldering irons, find a mate who is!! Don't be tempted to do what I did when I was young and inexperienced (not suggesting you are, of course) and super glued the wire back in place - in a yamaha, not warwick!!
 
anarchyok said:
Correct, or the problem will just happen again. If you're not familiar with soldering irons, find a mate who is!! Don't be tempted to do what I did when I was young and inexperienced (not suggesting you are, of course) and super glued the wire back in place - in a yamaha, not warwick!!
Click to expand...

lol to the yamaha
 
Is there anything you boys wanna share with the group? :lol:
 
You must log in or register to reply here.
Back
Top