measurements on a corvette std. 5

Thomas

Thomas

Joined
Oct 13, 2006
Messages
1,067
Reaction score
1
Headstock
from my crazy math (including ratios and other cool stuff)
i have come up with the headstock (from just above the nut) to be 6" tall at it's tallest point, and 5.5" where the second part of the headstock tops off (the second horn, if you will)
I also measured the top of the W as being 1/4" beloe the second, lower horn and 5/8" below the highest point.
If someone could give me the measure of the W (width and height), that would be amazing.
Bridge
For this part, i'm second guessing my measurements. i got the bridge itself (the part with height adjustments and stuff) as being 1.5" long and 4.425" wide. I don't quite believe the 4.425" part.
bascially, if someone could fill this out, i would love you forever:


if you have any corrections to the measurements on the headstock, those would be greatly appreciated too!

thanks, and sorry for all the trouble this may be... seeing as how stroud had so much time the other day, i thought this might take a little less :)[/u]
 
lol im back at college now :wink: not sure i can help you sorry

the measurements for the distance beteween the parts of the bridge and the placement of the bridge will be different between different models...
 
putting the warwick 2-piece pridge on my rockbass.
 
will do, but i'd like the specs to be like that of a warwick, so i'd love some measurements! don't want to do anything incorrectly seeing as how difficult it would be to fix if i get something wrong.
 
XxBassPlayerxX said:
please?
Click to expand...

Ok- i'll send you the measures - please be patience - first i have to do a gig tonight, then get some sleep, then some windsurfing, then i'll do the measuring. :wink:
 
I don't do measuring in inches, only in mm.

The headstock:

At the tallest point = 162 mm


The W: width = 14 mm (at top), hight = 13 mm, and 25 mm beloe the headstocks tallest point.

Bridge:

1 = 35 mm
2 = 16 mm
3 = 15 mm
4 = 107 mm
5 = 91 mm
6 = 102 mm
7 = 30 mm

Be aware:

The body size of the Rock Bass Corvette may differ from that of the Warwick Corvette std.

The most important measure is that from the nut to the middle of the bridge = 870 mm
 
You must log in or register to reply here.
Back
Top