speaker

I'm thinking about having a custom cab built in the next few months if possible, similar to the Warwick WCA 611 pro, but instead of six 10" drivers I was thinking of going with an 18" and two 10" drivers. I have the height, length and depth of the cab but I was wondering if anyone knew the...

Since this is really the only bass forum i hang out out, even though I run an ampeg rig, I'ma postin it here mates!!!! my ampeg bse 410 cab has one blown speaker i can hear cracklin from time to time, and the rig just has no balls, yeah it has volume and trembles rafters but, thats it, no...

Hi all! I would like to know which speaker configuration do you prefer: 4x10 or 1x15? And why?

Hi - My band has got another power amp & crossover for the PA and we are now running the 18" subs. So we've started putting a Mic's on the drums and running a line from my Profet 5.1 to the PA At the moment all I am using is a standard jack to jack instrument lead and running that from the...

hey, i got a 2x10 cab rated for 400W (the pro 211), and am putting about 200W through it with my amp. when i crank the volume, the speakers will move a considerable amount, even if i play quietly. But if i start slapping while the volume is turned up, the speakers go crazy and i'm worried...

Is there any difference or advantage to using Speakon speaker leads as opposed to standard jack to jack leads?

I'm pretty sure the cabinet I have is the WCA 411 Pro 8 ohms. When I first bought it, I used it with my old Yamaha Motion B Bass, and when the horn was turned up it produced a loud crackling / static sound. The man at the music shop said it is because my bass was not 'earthed' properly. I...

Hi everyone, this is my first post here after 2 years of owning A warwick bass amp! I have a Warwick Profet 5.2 and the matching black 600w 4x10 cabinet (can't remember the model no) I would like to add on another cabinet - probably a 2x10, mainly because with the deep / bass switch I get...

My 8 ohm cabinets do not have thru connections. Looking at the manual, the speakon and the 1/4 inch jack are in parallel. I assume it's ok to use speakon for one speaker and 1/4 jack for other as long as both are 8 ohm loads, or am I wrong?

Hey guys just a quick question. My band is doing a DYI recording - on the cheap as it were. We've got a USB M-Audio interface, a nice Mac with Guitar Rig and Pro-tools etc. I'm recording some of my bass tomorrow - our guitarist already has some tracks down and the drums are down. Anyway what...

Hi all! So I have a tech question about speaker cabinets. Why do some manufacturers make enclosures with an 18" speaker that has a higher minimum frequency response than their similar 10" speakers? example: Eden D118XL - 500w - single 18" speaker cab - 42hz - 2.5khz ±2dB Eden D210XST -...

:eek:

What is the best way to connect head to cabinets? Is this speakon kit just a swick, or has it got merit? Cheers guys.

Hi, i'm reading the amp manual now and it says that the speaker out sockets are designed to supply speaker cabinets. Lockable Coaxial Speaker Connection and 1/4 jack socket (only Tubepath 5.1) are connected parallel" ... what this parallel connection means? I need to connect in the same time...

Hi. firs of all: sorry for my poooor english. :) Ive just recived today my brand new WCA 115 Pro from Thomann.de (im from Spain). I buy it as a complement to the 211 Pro I allready own. Well, i just take the cabinet out of the gigantic box and connect it to the second parallel output of my...

Oliver, How are ya mate,I'll look back at this one day & laugh but Zakk,my 3 year old just poked a hole in a speaker with a jack,thru the grill.I know I can patch it with something called dope?I've never done it before so I was hoping you might have some advice for me. thanks heaps mate.

I'm looking for a single speaker combo that's easily portable but has great sound. What are the opionions out there?? I played through the mesa boogie 1x12 scout and was very impressed...but at almost $1100 usd I want to explore my options. Thanks in advance.

So I'm wondering.....Is it better to have a cab that takes more watts than the amp can put out, or an amp rated higher than the cab?? My current cab takes 1000 watts, and my amp puts 750 watts into it, but for curiosity's sake I'd like some feedback. Also because I'm looking into a new cab...

hi everybody, i´m interested in the 611 cab, but would prefer 4 or 3 ohms inductivity so my amp delivers more power. so my question is, what are the specs of the single speakers used in this cab, so i can find out how to rewire ? i guess they could be 4 ohms each and wired 3 in series, with...