Strings question for my Corvette $$

M

MikeyPstd06

Joined
Nov 7, 2007
Messages
28
Reaction score
0
Hello all! I have a not so big dilemma but need an answer.

I have a Corvette $$ that was last strung with Warwick Black Labels, not bad strings by the way.. But, I purchased a pack of D'Addario Nickel Plated steels, and a pack of D'addario prosteels. Both same gauge .45-.105

Which string type would yield more "growl" for a more midrangy sound? Also, Is tension generally higher with Nickel plated strings?

Thanks much!!
 
hey,
Personally, I use nickel on my double buck just because I prefer the overall feel and tone of the strings, but its all up to personal preference. Try them both and see which one you prefer. Good luck!
 
Thanks buddy! Do you feel the Nickel lets the bass speak? Does it bring out the true tone in the $$? The Black labels sure did !
 
And it seemed like the steel strings had a little more flop to them.. Just the right kind of flop that made them not so stiff and let them resonate better? Or so I thought.. But you say nickels will make the beast growl?
 
For me the nickel sounded a lot more lively than the steel, but that's just me. I suggest you try them both and see which ones you prefer tonally and also how comfortable they feel to you. The double buck is a beast and will growl with both, but it's up to the sound you prefer. I hope that what i'm saying is helpful to you! :D
 
Nickel = growl, definitely in my experience when it comes to the $$

Sometimes, it can be tricky to get the $$ to growl (No matter what string you use). If you need some extra growl, switch to passive, pan to the bridge pickup, and use either Single coil or parallel. Seems to work for me :)

My advice = Try all different kinds of strings! So far, my favorite are the DR Lo Riders for the $$ :D.
 
Thanks for the good words Trey! I have tried the DR highbeem.. they seemed kinda oomph less.. I will definitely check out the lo riders! Thanks again!
 
I have a similar question(I figure it is easier to ask it here than start a new thread)

I just acquired a 2001 Corvette Standard Fretless, and it desperately needs new strings. This is my first bass, and so I have no clue what to look for in strings. I know flats are recommended for a fretless, because rounds will chew up the board. It already has slight marks from previous round strings. What would best retain the growl, and work well for Jazz?
 
Chubbaluphigous said:
I have a similar question(I figure it is easier to ask it here than start a new thread)

I just acquired a 2001 Corvette Standard Fretless, and it desperately needs new strings. This is my first bass, and so I have no clue what to look for in strings. I know flats are recommended for a fretless, because rounds will chew up the board. It already has slight marks from previous round strings. What would best retain the growl, and work well for Jazz?
Click to expand...

I hear some really good things about the 7ender nylon tapewounds :)
 
Last edited by a moderator:
Chubbaluphigous said:
I have a similar question(I figure it is easier to ask it here than start a new thread)

I just acquired a 2001 Corvette Standard Fretless, and it desperately needs new strings. This is my first bass, and so I have no clue what to look for in strings. I know flats are recommended for a fretless, because rounds will chew up the board. It already has slight marks from previous round strings. What would best retain the growl, and work well for Jazz?
Click to expand...

Forget about getting flats just because you're afraid of tearing up the board. The Ebony board on your Corvette Fretless is VERY hard, and it will take YEARS of solid playing before you even need the board leveled.

You will get slight superficial scratch marks quite quickly, but it takes a long long time before those superficial scratches turn into anything more serious.

If you want flats because of the sound go for it, but if you like the sound of rounds you should use them... they will not "chew up" your Ebony board.

;)
 
That is it! Those fretboards are very sturdy! Maybe Half rounds? those aren't too bad!
 
Thanks.

Since I haven't even heard the difference between flats, rounds, and half rounds. I am just going to cycle through them. I am just learning after all, so this will be good. I just don't want to waste money searching for a great set of rounds, flats, etc. My first set coming to me are the D'addario chrome flats. Then I'll check out the DR Lowriders.
 
The flats and Half rounds aren't too cheap.. Tho not too expensive! Flats are very very VERY mellow and warm.. I would try flats on it if you want more of a MWAHHH... Try the half rounds if you're looking for a good flat surfaced string with a little more bite.
 
You must log in or register to reply here.
Back
Top