P Nut Factory Specs.

B

Blazeman

Joined
Dec 8, 2007
Messages
27
Reaction score
0
I'm looking for string heights at 1st and 17th frets, amount of relief at 12th fret, fretboard radius and pickup heights.

Any other information would be wonderful.

Thank You.
 
Hey Blazeman,

Please check Seth's tutorials here:



Cheers, Flo
 
I would have to say the factory specs really don't mattter. Warwicks are so easy to set up you can just do it yourself. I did, fairly easy job, i just have this little buzz at the 6th fret on the e string i can't get rid of, but i just need to loosen the rod a bit.
 
Yes Andrew I would agree Warwicks are relatively easy to set up.

You gotta love the just-a-nut. My skills of replacing nuts has not yet been acquired.

I'm looking for the specs as a starting point to eliminate some trial and error.

If you have a buzz on the 6th fret and no where else it sounds like you may have a high fret.

Florin thanks for the links, I'll check them out.

Blaze
 
Blazeman,

At fret 12, we have 2,5 mm for B string, and 2 mm for G string.
relief is as described in seth's tutorials
The MM pickup should be around 4mm, and the other one you have to set it to have the same output as the MM one.

Cheers/ Flo
 
You must log in or register to reply here.
Back
Top