Pro Tube Problem

Joined
Feb 5, 2006
Messages
375
Reaction score
0
Hi,

Im having a few problems with my Pro Tube IX. When in tube mode the clip light is coming on at a very low gain level. i had the the gain on about 1 or 2 and it has started to clip. In S/State mode it is fine. Could it be a dead tube?
 

TBS

Joined
Jan 19, 2006
Messages
299
Reaction score
0
Have it serviced...

Getting the red clipping led on with the gain so low seems like a malfunction to me. I don't think the output from your bass is a problem as it works fine in SS channel.

But I am no expert to tell you where it is coming from.

Is the EQ flat on both channels?
 
Joined
Feb 16, 2006
Messages
226
Reaction score
0
Hey I've got the same Freaking Problem!!! Coul I send the thing to Warwick or somewhat or sohuld I just bring it to the next shop? Cause it got really extreme, And I really have no Clue where this is coming from...
 
Joined
Apr 17, 2006
Messages
1,388
Reaction score
34
[wolfman said:
] In S/State mode it is fine. Could it be a dead tube?

Have you checked the tubes while it's on? One of my tubes was busted when I originally got mine, but I opened up the top of it and noticed one wasn't glowing after a few minutes...

I don't know otherwise...
 
Top Bottom